Rigid boxes aren’t an entry-level option and they’re certainly a more expensive option than folding cartons, but they’re still a true high-end option. Any errors are much more costly because of that fact. The problem is that these errors are typically silent. They slowly eat away at your wallet all the time and you’ll never really notice. Here are 5 hard box errors that quietly rip you off and just what exactly to do to repair each one.

 Mistake 1: is to make the box too large.

This is the most prevalent concealed waste. Brands will often order a box that’s much sturdier than the product itself. More material, heavier construction, thicker board. It is comfortable but it takes its toll on you.

It is not necessary to have a heavy-duty box for a lightweight product. Extra rigidity that you will never use is just a wasted dollar. The box is protecting that, but that’s not making your bill any more expensive.

Over-building costs money because it wastes on:

• Additional material that isn’t required.
• Increased box costs.
• More weight and costs of transporting items.

The solution: size the box to the product itself. Whether it’s the protection you need or the right-sized construction, good rigid gift boxes wholesale have both.

Mistake 2: The Wrong Size

The size error is an insidious and expensive one. If the box is too large, it wastes materials, requires additional packing materials, and is more expensive to ship. The box will look cramped and cheap if it’s too small.

The more the box is the more the cost. More board, more wrap, more filler, and more shipping! That waste can quickly total hundreds of orders. One of the simplest methods of saving is to right-size.

The size mismatch comes at a price to you:

• Extra material that ends up on boxes that are too large.
• Additional filling to fill in the spaces.
• More shipping costs with each use.

The solution: make the box just the right size to enclose your product. A tight fit will save money and it will look much more upscale.

 Mistake 3 – Closure of the Wrong Type

There are numerous types of box closures for rigid boxes. Magnetic lids, lift-off tops, drawers, ribbons. If you select the wrong one, you could not only lose money but also the enjoyment of the experience.

A fancy magnetic closure will be more expensive than a simple lid off one. If you don’t need it, then you’re wasting flash that you’re not going to use. However, the inappropriate closure can reduce the value of a high-quality product. Balance matters.

The following are the costs of closure mistakes:

• Extra payment for closures that are not required.
• Failure to align the box with the product.
• Value lost as a result of incorrect choice.

The Solution: Select the closure that is available based upon your product and budget. Match style to experience needed.

Mistake 4: Skimping on the Insert.

Here’s a slip that costs money in another form. Brands spend money on a gorgeous box, and then skimp or skip on the insert. That’s a sham saving.

If it is not a correct insert, your product is moving about inside the box. It may get damaged and the reveal may not turn out as a professional reveal. Product damage equals refunds and hiccups mean loss of brand value. It’s not time to cut corners in the insert.

If the insert is not put on correctly, it results in:

• Damage to product and refunds.
• A cluttered, tacky unveiling.
• Landed in a lose-lose situation, losing both brand value and trust.

The solution: get a good fit insert that will protect and present. It’s a minor expense that saves big losses.

 Mistake 5: Ordering an incorrect amount.

There are also quiet thefts of money in quantity errors. Order too few and you end up paying a lot more per box and placing frequent re-orders. Buy too much and tie up capital in merchandise that you might not sell.

Rigid boxes have a greater cost per unit for lower volumes. However, over-ordering in order to get that discount can be counter-productive, particularly if your design evolves. Its aim is a wise compromise of costs and demands. When buying wholesale rigid gift boxes, consider the volume price.

When you make quantity errors, they cost you in the following ways:

• Box price per box on small quantities.
• Cash in excess stock that is tied up.
• If you need to change your design, you should throw away all your work.

The solution is to buy the minimum amount to get good volume discounts, but not too much that you end up with too many items. Schedule according to actual demand.

Why do these mistakes go unnoticed?

The problem with the errors is that they are silent. There’s no single large bill. Rather, there are small amounts of leakage for every order.

Some additional text. A little too big of a box here. A pointless magnetic closure. Each, by itself, is a minor problem. However when it comes to hundreds or thousands of boxes, it’s real cash.

These hidden costs combine as:

• Overspends on each order, small.
• Surrounds you with things you don’t question.
• Much more expensive that silently reduces your profits.
• To plug these leaks, they have to be identified.
• It’s easy and intelligent to get them fixed.

The good news is that these are easily corrected. Most are more about making smarter choices than spending more. Indeed, a lot of repairs will save you cash immediately.

Right-size your box. Match the strength and closures with the product. Get a good insert. And place an intelligent order. All options reduce waste and improve quality.

Making better decisions means you have:

• Reduce prices for all orders.
• More security and less refunds.
• A higher quality end product box.

Final Thoughts

So here are the 5 box boxing blunders you are unwittingly losing money on. Over-building the box. Selecting the incorrect size. Selecting an incorrect closure. Not using enough insert. Placing an incorrect order.

They’re all small, but they slowly drain money from each order you make. What is driving the frustration is that all five are entirely preventable if a little care and planning is used.

Then consider your current hard-to-open boxes, then look at them realistically. Are they right-sized? Right-strength? Do they have a suitable insert? When purchased carefully, rigid gift boxes wholesale will help both preserve your product and your profits. Once you’ve corrected the following five packaging errors, you will begin to save money with your packaging rather than letting it bleed away.